Status: Full setup. Obvius dataloggers push data to Data Hub by configuring an upload URL directly on the logger’s own web interface.
1
Open the Obvius logger interface
Sign in to the datalogger’s web interface with its device credentials.
2
Go to Log File Data
From the logger’s main menu, select Log File Data.
3
Open Setup / Upload
Expand the Setup / Upload section for the channel you want to configure.
4
Enable an empty channel
Choose an unused channel and enable it.
5
Set the upload URL
Enter your organization’s Data Hub upload endpoint in the Upload URL field:
This is
http://, not https:// — that’s intentional, not a typo. Obvius loggers are mostly not set up to support TLS, so the upload endpoint for this source specifically accepts plain HTTP. Every other source uses https://.6
Apply and notify the Data Hub team
Click Apply to save. Then send the Data Hub team the logger’s serial number — this is required to assign the logger to your organization before it starts appearing in Data Hub.
1
Find the logger's serial number
For Obvius devices, this is shown in the logger’s Status section.
2
Locate the data source in Data Hub
Go to Data Hub → Data Sources and find the entry matching your logger’s serial number.
3
Open the data source
Click it to view all variables reported by the logger.
4
Configure each variable
Click Configure, then Edit to set the variable’s display name, resource type, and units, and click Finish Editing to save.
5
Add to Data Hub
Toggle Add To Data Hub on each variable you want visible on the Variables page.